top of page

TPCL 885084

Termite Inspection / Control in the Houston Home

Wood-destroying insects and other organisms can cause serious problems in the wooden structural components of a house and may go undetected for a long period of time in Houston, Texas.

Wood-destroying insects and other organisms can cause serious problems in the wooden structural components of a house, and may go undetected for a long period of time.


New / Old Construction



About Termite Inspections

Houston, Texas is a great place for termites flourish, so it is important to perform a termite inspection regularly. A termite inspection, or as it called by TDA the State of Texas, Termite and Other Wood Destroying Insect Report (WDI Report), is required and strongly recommended when purchasing a home. To provide a termite inspection, the inspector must have a TPCL or termite category license card issued from the Texas Department of Agriculture (TDA). These licensed applicators / inspectors must have additional training and sign an affidavit stating as much. Card holders are allowed to perform WDI inspections in Texas. Houston Jacob Home Inspection, LLC. is properly licensed to perform a termite inspection in Texas (WDI reports).

Having a reliable inspection company perform your termite inspection is best. Houston Jacob Home Inspection, your termite inspection will be reliable. Certified termite inspectors at Houston Jacob Home Inspection, LLC. are capable of identifying all signs of termites during an inspection, as well as identifying the location or conducive condition of termites. So what does a termite inspection, and other Wood Destroying Insect consist of? First of all, consumers need to identify the major types of termites and other wood destroying Insect. There are three different types of termites in Texas, and within those types are different species.  A termite inspector will be looking for evidence of following three types:




Subterranean termites are the most damaging insects of wood. Their presence is hard to notice, and damage usually is found before the termites are seen. Prevent

infestations because if they occur, they will almost always

need professional pest-control service.


Signs of Infestation


Hire a qualified TDA Licensed / InterNACHI inspector to inspect for termites or other wood-destroying organisms. Generally, the first sign of infestation is the presence of swarming termites on the window or near indoor light. If they are found inside the house, it almost always means that they have infested. Other signs that may be found are termite wings on window sills or in cobwebs, and shelter tubes, which are tunnels constructed by the termites from soil or wood and debris. Usually, wood damage is not found at first, but when it is found, it definitely reveals a termite infestation. Anywhere wood touches soil is a possible entry into a home for termites. Examine wood which sounds dull or hollow when struck by a screwdriver or hammer. Inspect suspected areas with a sharp, pointed tool, such as an ice pick, to find termite galleries or their damage.




                                                                                 Control measures include reducing the potential                                                                                                infestation, preventing termite entry, and applying                                                                                            chemicals for remedial treatment.






Inspect thoroughly to determine if there is an infestation, damage, and/or conditions that could invite a termite attack, or the need for remedial control measures. The tools and equipment needed for an inspection include a flashlight, ice pick or sharp-pointed screwdriver, ladder, and protective clothing. Always hire an TPCL Licensed / InterNACHI inspector for your inspection needs, as they are trained by the highest standards in the inspection industry.




Check the foundation of the house, garage and other buildings for shelter tubes coming from the soil. Look closely around porches, connecting patios, sidewalks, areas near kitchens and bathrooms, and hard-to-see places. Check window and door frames, and where utility services enter the house for termite infestation or wood decay. Also, look behind shrubbery and plants near walls. Pay special attention to areas where earth and wood meet, such as fences, stair carriages and trellises. Open and check any exterior electrical meter or fuse box set into the wall, a common point of infestation.




Carefully check all doors, window facings, baseboards, and hardwood flooring. Discoloration or stains on walls or ceilings may mean that water is leaking and can decay wood, and this can aid termite infestation. It is very important to inspect where plumbing and utility pipes enter the foundation and flooring. Also, examine the attic for shelter tubes, water leakage, and wood damage.



 Many termite problems can be prevented. The most important thing to do is to deny termites access to food (wood), moisture and shelter. Follow these suggestions:

  • have at least a 2-inch clearance between the house and planter boxes, or soil-filled porches;

  • eliminate all wood-to-soil contact, such as trellises, fence posts, stair casings and door facings (they can be put on masonry blocks or on treated wood);

  • separate shrubbery from the house to help make it easier to inspect the foundation line;

  • use wolmanized wood (pressure-treated wood) so that rain will not rot it;

  • seal openings through the foundation;

  • remove wood scraps and stumps from around the foundation;

  • have at least 12 to 18 inches of clearance between floor beams and the soil underneath.


Chemical Treatment


Termite treatment often requires specialized equipment. Therefore, it is recommended that you always use the services of a pest control operator because he is familiar with construction principles and practices, has the necessary equipment, and knows about subterranean termites.


Exterminating Termites

If you think you have a termite infestation in your house, you need to call a structural pest control company to conduct a professional inspection. To find a company, ask friends or coworkers for recommendations, or check the Yellow Pages. If the inspection finds evidence of drywood termites, you have several options, depending on the degree of infestation. Fumigation and heating of the entire house are the only options that ensure eradication in the entire structure. If the infestation is contained in a small area, local or spot control may be effective. However, hidden infestations in other parts of the structure will not be eradicated.


Total (Whole-House) Eradication 


For the heat method, pets, plants, and other items that might be damaged by high temperatures must be removed. The house is then covered with tarps, and hot air is blown into the tarp until the inside temperature reaches 140° F to 150° F, and the temperature of the structural timbers reaches 120° F. The time to complete this procedure varies greatly from one structure to another, depending on factors such as the building's construction and the weather conditions. The procedure may not be practical for structures that cannot be heated evenly.


Local or Spot Control


Local or spot-control methods include the use of pesticides, electric current, extreme cold, localized heat, microwave energy, or any combination of these methods. Local or spot control also includes the removal and replacement of infested structural timber. These methods are intended to remove or kill termites only within the specific targeted area, leaving open the possibility of other undetected infestations within the structure. These treatments are NOT designed for whole-house eradication. Any pest control company that claims whole-house results with local or spot control methods is guilty of false advertising and should be reported.


Local or spot treatment with pesticides involves drilling and injecting pesticides into infested timbers, as well as the topical application of toxic chemicals. The electric-current method involves delivering                                                                                   electric energy to targeted infestations. For the extreme                                                                                   cold method, liquid nitrogen is pumped into wall voids                                                                                     adjacent to suspected infestation sites, reducing the                                                                                         area to -20° F. The localized heat method involves                                                                                             heating infested structural timbers to 120° F. The                                                                                                 microwave method kills termites by directing                                                                                                     microwaves into termite-infested wood.



If you see the following signs in your house, you might have termites:

• sawdust-like droppings;
• dirt or mud-like tubes or trails on the structure;
• damaged wood members (like window sills); and 
• swarming winged insects within the structure, especially in the spring or fall.



termite man

Termite Inspection / Control in the Home

bottom of page